Email
Contact Us
Secondary Suites & ADUs | 0 views |

Is an interconnected fire alarm required in a Toronto duplex?

Question

Is an interconnected fire alarm required in a Toronto duplex?

Answer from Construction Brain

Yes, interconnected smoke alarms are required in Toronto duplexes under both the Ontario Building Code and the Ontario Fire Code. This means when one alarm sounds, all alarms in the building sound simultaneously — a critical safety feature in multi-unit homes.

Ontario's Fire Code (O. Reg. 213/07) requires that smoke alarms be installed on every storey of a dwelling unit and outside each sleeping area. In a duplex — which contains two separate dwelling units — each unit must have its own smoke alarms, and they must be interconnected so that an alarm triggered in one unit activates alarms throughout the entire building. This protects occupants in both units, especially if a fire starts in an unoccupied or sleeping area of the other unit.

The interconnection requirement applies whether you're building a new duplex or converting an existing single-family home into a duplex. For new construction, the Ontario Building Code (OBC) requires hardwired, interconnected smoke alarms with battery backup. For existing homes being converted, the Fire Code still mandates interconnection, though the method of achieving it may vary depending on the age and wiring of the home.

How interconnection is achieved depends on your home's wiring. In newer homes, hardwired alarms with a three-wire system (including an interconnect wire) are the standard approach. In older Toronto homes — particularly the century-era semis and bungalows common in neighbourhoods like The Annex, Leslieville, or Scarborough — running new wiring can be challenging. In these cases, wireless interconnected smoke alarms (using RF signals to communicate between units) are an accepted alternative under the Fire Code and can save significant retrofit costs.

Carbon monoxide (CO) alarms are also required under Ontario law in any dwelling unit that contains a fuel-burning appliance, fireplace, or attached garage — which covers the vast majority of Toronto duplexes. CO alarms must be installed adjacent to each sleeping area.

From a permit and inspection standpoint, if you're converting a single-family home to a duplex in Toronto, you'll need a building permit from the City of Toronto Building Division (416-397-5330 or toronto.ca/building). The smoke alarm and CO alarm installations will be reviewed as part of that process. Any electrical work involved in hardwiring alarms requires an ESA (Electrical Safety Authority) permit — this is not a DIY task you can legally skip.

Costs to retrofit interconnected alarms in an existing Toronto duplex typically run $300–$700 for wireless systems (DIY-friendly once you've confirmed compliance) or $800–$2,000+ for hardwired systems installed by a licensed electrician, depending on the complexity of the wiring run.

As a next step, confirm your current alarm setup meets Fire Code requirements — especially if you've recently converted or inherited a duplex. Browse licensed electricians in our directory at Toronto Construction Network to get quotes on a hardwired system, or consult the Toronto Fire Services if you have questions about compliance for your specific property.

Toronto Construction Network

Construction Brain — Built by a licensed contractor with 20+ years in the field. Powered by AI with strict guidelines and real building knowledge.

Ready to Start Your Project?

Get a free, no-obligation estimate for your Toronto renovation. Our team at TCN is ready to help bring your vision to life.

Contact Us