How much do contractors charge for fence gate install in Toronto?

Fence gate installation in Toronto typically runs $300–$900 for a standard single gate, with double driveway gates ranging from $800–$2,500+ depending on materials, size, and complexity.

The biggest cost driver is the gate material. A basic pressure-treated wood gate will sit at the lower end of the range, while ornamental steel, aluminum, or cedar gates push costs higher. Here's a general breakdown of what Toronto contractors are charging right now:

• Wood gate (single, 4ft): $300–$600 installed
• Wood gate (double/driveway, 10–12ft): $700–$1,400 installed
• Aluminum or vinyl gate (single): $450–$800 installed
• Ornamental steel/iron gate (single): $600–$1,200 installed
• Automated driveway gate (double): $3,000–$8,000+ installed

These prices generally include labour, hardware (hinges, latches, drop rods), and minor post work. They typically exclude the cost of replacing or installing new gate posts, which adds $200–$600 per post if concrete footings are needed.

Toronto-specific factors that affect your price: Post footings in Toronto must go below the frost line — that's 4 feet deep — so if your existing posts are shallow or rotted, expect additional costs. Many older Toronto neighbourhoods like The Annex, Leslieville, or Scarborough have uneven or narrow lot lines, which can complicate installation and add time to the job.

Permits are generally not required for a fence gate replacement or standard residential fence under 2 metres (6.5ft) in Toronto. However, if you're on a corner lot, near a ravine, or the fence is adjacent to a pool, different rules apply. Pool enclosures must comply with the Ontario Building Code and require a permit — the gate latch must be self-closing and self-latching at a minimum height of 1.5 metres. When in doubt, check with Toronto Building at 416-397-5330 or visit toronto.ca/building.

For most homeowners, gate installation is best left to a professional. Getting the posts plumb, the swing clearance right, and the hardware properly set takes experience — a poorly hung gate sags within a season. That said, a handy homeowner comfortable with post-hole digging and basic carpentry can tackle a simple wood gate replacement on an existing solid post.

Your next step is to get 2–3 quotes from local fence contractors, and make sure each quote specifies materials, hardware grade, and whether post work is included. Browse licensed fence contractors in the Toronto Construction Network directory to find local pros who work in your neighbourhood.